| 7038CTRDULP3 NSK Super Precision Bearings | Mass bearing:0.84 kg; rb max.:1.5 mm; d:55 mm; Calculation factor e:0.4; Calculation factor Y:1.5; Basic static load rating C0:129 kN; T:26.75 mm; Db min.:95 mm; db min.:65 mm; da max.:64 mm; d1 ≈:75.33 mm; a:22.253 mm; Basic dynamic load rating C:130 kN; Dimension series:3DC; Fatigue load limit Pu:15 kN; r1,2 min.:2 mm; r3,4 min.:1.5 mm; Cb min.:5.5 mm; Calculation factor Y0:0.8; ra max.:2 mm; |
| 7036CTRDUMP3 NSK Super Precision Bearings | Basic Static Radial Load Rating Co:129000 N; d:80.000 mm; Oil Speed Rating Open/Shielded n2:4000 rpm; Basic Dynamic Radial Load Rating C:138000 N; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:3300 rpm; B:39.00 mm; Fillet Radius ra:2.00 mm; D:170.0000 mm; |
| 7934A5TRDULP3 NSK Super Precision Bearings | D:320 mm; d2:180 mm; B:86 mm; d2 (max):230.5 mm; Pu:98.200 kN; rs (min):4 mm; Dynamic (Ca):736 kN; b1:29 mm; F:218 mm; b:12 mm; Static (Coa):1060 kN; s:6.9 mm; E:mm; r1s (min):4 mm; |
| 7040A5TRSUMP3 NSK Super Precision Bearings | Hydraulic nut:HMV 80 E; d:380 mm; G2:G 1/4; d1:360 mm; Mass withdrawal sleeve:42 kg; B2:294 mm; G1:42 mm; A:9 mm; G:Tr 400x5; B1:284 mm; |
| 7040CTRSUMP3 NSK Super Precision Bearings | Basic Static Radial Load Rating Co:2900 N; Basic Dynamic Radial Load Rating C:11900 N; D:42.0000 mm; Fillet Radius ra:1.00 mm; d:15.000 mm; B:17.00 mm; Grease Speed Rating n1:15000 rpm; Oil Speed Rating n2:18000 rpm; |
| 7036A5TRSUPL4 NSK Super Precision Bearings | P150°:48 kN; H2:44.45 mm; Cap bolt recommended tightening torque:298.3 N·m; L:387.35 mm; Da:180 mm; R1:65.088 mm; da:106.362 mm; Eye bolt:2 x 3/8-16 UNC; Housing:SSAFS 024 KA; P60°:141 kN; Mass pillow block:39.5 kg; Initial grease fill:181.44 g; Cap bolt, SAE grade:8; Pa:16.7 kN; H:222.25 mm; End plug (suffix Y):EPR 14; Stabilizing ring:2 x 38151-24; ba:46.831 mm; Bearing limiting speed:4000 r/min; |
| 7936CTRDUDLP3 NSK Super Precision Bearings | D:150.0000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; B:35.00 mm; Fillet Radius ra:2.00 mm; Accessories:Without Accessories; d:60.000 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Basic Dynamic Radial Load Rating C:108000 N; Sealed Speed Rating n3:3100 rpm; Basic Static Radial Load Rating Co:69500 N; |
| 7940CTRDUMP3 NSK Super Precision Bearings | Grease Speed Rating Open/Shielded n1:17000 rpm; B:13.00 mm; Sealed Speed Rating n3:12000 rpm; Grease Speed Rating n1:17000 rpm; Oil Speed Rating Open/Shielded n2:20000 rpm; Basic Static Radial Load Rating Co:5400 N; Oil Speed Rating n2:20000 rpm; D:42.0000 mm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:11400 N; Fillet Radius ra:1.00 mm; d:15.000 mm; |
| 7934A5TRQUMP3 NSK Super Precision Bearings | A1:50.8 mm; R1:23.813 mm; H1:50.8 mm; P120°:6.67 kN; P90°:11.1 kN; Initial grease fill:19.845 g; Taconite seal:TER 14; P60°:18.2 kN; PG:1/8 NPT; Appropriate attachment bolt size G:0.5 in; End plug (suffix Y):EPR 2; H2:20.637 mm; Ca:26.797 mm; R2:12.7 mm; Cap bolt, SAE grade:5; Pa:2.4 kN; P180°:7.12 kN; J max.:155.575 mm; S:1.984 mm; ba:24.606 mm; |
| 7002A5TRQUMP3 NSK Super Precision Bearings | Minimum load factor A:300; Reference speed:360 r/min; D:1060 mm; da min.:991 mm; Mass bearing (including seat washer where applicable):140 kg; r1,2 min.:5 mm; Limiting speed:500 r/min; D1 ≈:906 mm; d1 ≈:1054 mm; Fatigue load limit Pu:90 kN; Basic static load rating C0:7650 kN; Da max.:969 mm; H:95 mm; Basic dynamic load rating C:630 kN; ra max.:4 mm; d:900 mm; |
| 7003A5TRSULP3 NSK Super Precision Bearings | d2 max.:162 mm; G:M 72x4; h1:265 mm; C1 max.:43 mm; Basic static load rating C0:530 kN; l4 max.:349 mm; r1 min.:1 mm; d4 ≈:92 mm; Basic dynamic load rating C:315 kN; B:49 mm; Mass rod end:10.5 kg; dk:92 mm; l3 min.:80 mm; Specific dynamic load factor K:100 N/mm²; l5 ≈:40 mm; α:6 °; l7 min.:80 mm; d:70 mm; Material constant KM:330; w:80 mm; |
| 7004A5TRQUMP3 NSK Super Precision Bearings | B1:87.782 mm; Threads per inch:12; B:20.904 mm; B4:23.825 mm; d3 max.:155.702 mm; Sleeve:S 24x4.3/16; d1:106.362 mm; G:119.786 mm; Hydraulic nut:HMVC 24E; d:120 mm; Mass adapter sleeve assembly:3 kg; |