| 7003CTRQUMP3 NSK Super Precision Bearings | r1 max.:0.4 mm; Dw:1.5 mm; Mass needle roller:0.081 g; r1,2 min.:0.1 mm; Lw:5.8 mm; r2 max.:0.6 mm; |
| 7202A5TRDUMP3 NSK Super Precision Bearings | Pa:30.9 kN; End plug (suffix Y):EPR 14; Stabilizing ring:SR-0-24; ba:67.469 mm; Max. speed for Taconite seal:725 r/min; Appropriate attachment bolt size G:1 in; Cap bolt, SAE grade:5; Taconite seal:TER 111; L:539.75 mm; P60°:230 kN; Cap bolt recommended tightening torque:203.4 N·m; da:103.188 mm; RG:3/4 NPT; P150°:80.1 kN; H:320.675 mm; PG:1/4 NPT; Ca:95.809 mm; H2:63.5 mm; J min.:431.8 mm; |
| 7036CTRDULP3 NSK Super Precision Bearings | Basic dynamic load rating C:520 kN; D:100.013 mm; Specific static load factor K0:300 N/mm²; b:9 mm; α:5 °; C:47.625 mm; d:63.5 mm; Material constant KM:330; Basic static load rating C0:1040 kN; ra max.:1 mm; da max.:77.7 mm; Design (sliding contact surface combination):Steel/steel; Da max.:94.7 mm; d1 ≈:77.724 mm; B:95.25 mm; r2 min.:1 mm; r1 min.:1 mm; Specific dynamic load factor K:150 N/mm²; |
| 7934A5TRSULP3 NSK Super Precision Bearings | D:440 mm; D1 ≈:401 mm; K:5 mm; r1,2 min.:3 mm; das:352 mm; ra max.:2.5 mm; s max.:6 mm; r3,4 min.:3 mm; B:118 mm; da min.:336 mm; Da max.:425 mm; Basic static load rating C0:4050 kN; d1 ≈:368 mm; Limiting speed:750 r/min; Mass bearing:55.5 kg; d:320 mm; rb max.:2.5 mm; Calculation factor kr:0.25; b1:9.4 mm; Fatigue load limit Pu:375 kN; |
| 7904A5TRDUDMP3 NSK Super Precision Bearings | da:69.85 mm; Attachment bolt diameter G:19.05 mm; A:68.263 mm; S:0.794 mm; H1:82.55 mm; J min.:198.438 mm; B:65.484 mm; L:265.113 mm; Basic dynamic load rating C:212 kN; J max.:223.838 mm; H2:57.15 mm; H:165.894 mm; Limiting speed:3400 r/min; Mass bearing unit:9.98 kg; s:32.941 mm; |
| 7948CTRSULP3 NSK Super Precision Bearings | Da:259.999 mm; Initial grease fill:481.95 g; Stabilizing ring:2 x SR-0-24; R1:87.313 mm; H:298.45 mm; P120°:116 kN; PG:1/4 NPT; Max. speed for Taconite seal:520 r/min; A1:149.225 mm; P90°:180 kN; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:8; h:44.45 mm; L:511.175 mm; Taconite seal:TER 141; P180°:127 kN; P150°:105 kN; Mass pillow block:92 kg; Ca:86.614 mm; A2:260.35 mm; |
| 7032A5TRSUMP3 NSK Super Precision Bearings | Material constant KM:330; Basic static load rating C0:530 kN; d:70 mm; B:49 mm; Basic dynamic load rating C:465 kN; w:80 mm; l5 ≈:40 mm; l3 min.:80 mm; l4 max.:284 mm; h1:200 mm; G:M 56x4; r1 min.:1 mm; α:6 °; d2 max.:162 mm; l7 min.:80 mm; Specific dynamic load factor K:150 N/mm²; Mass rod end:10.5 kg; dk:92 mm; d4 ≈:92 mm; C1 max.:43 mm; |
| 7205CTRDUMP3 NSK Super Precision Bearings | Mass inner ring:0.026 kg; r, r1,2 min.:0.3 mm; B:16 mm; F:30 mm; d:25 mm; |
| 7203A5TRDULP3 NSK Super Precision Bearings | B2:90 mm; Reference speed:430 r/min; Ba min.:26 mm; r1,2 min.:6 mm; d1:710 mm; Basic dynamic load rating C:6100 kN; Da max.:977 mm; d3:870 mm; B5:112 mm; Ca min.:2.7 mm; Mass bearing + sleeve:590 kg; D1 ≈:934 mm; Fatigue load limit Pu:815 kN; s1 max.:35.7 mm; Misalignment factor k1:0.131; Operating clearance factor k2:0.101; Basic static load rating C0:13400 kN; Limiting speed:560 r/min; d2 ≈:830 mm; |
| 7938A5TRSULP3 NSK Super Precision Bearings | Basic dynamic load rating C:174 kN; d1 ≈:150 mm; s:43 mm; Reference speed:1500 r/min; H1:58 mm; H:53.1 mm; ra max.:1 mm; Da max.:115 mm; Basic static load rating C0:405 kN; D3:155 mm; Fatigue load limit Pu:14 kN; D:150 mm; da min.:124 mm; C:17.5 mm; Limiting speed:2000 r/min; d:85 mm; D2:115 mm; D1 ≈:88 mm; Minimum load factor A:1.1; R:112 mm; |
| 7204A5TRDULP3 NSK Super Precision Bearings | Labyrinth ring:2 x LOR 118; RG:3/8 NPT; Stabilizing ring:2 x 38151-26; da:114.3 mm; L:419.1 mm; J min.:320.675 mm; Bearing limiting speed:3600 r/min; Cap bolt recommended tightening torque:298.3 N·m; N1:24.209 mm; ba:51.594 mm; H1:125.425 mm; P150°:59.6 kN; PG:1/4 NPT; Da:200 mm; Cap bolt, SAE grade:8; Cap bolt:5/8-11 UNC; H:244.475 mm; R2:31.75 mm; Appropriate attachment bolt size G:0.75 in; |
| 7200CTRSULP3 NSK Super Precision Bearings | R1:42.862 mm; H2:28.575 mm; P60°:39.1 kN; h:36.513 mm; H:147.637 mm; End plug (suffix Y):EPR 4; P90°:23.6 kN; Appropriate attachment bolt size G:0.625 in; J min.:196.85 mm; Cap bolt:2 x 1/2-13 UNC; Mass pillow block:10 kg; P180°:15.6 kN; Taconite seal:TER 20; da:42.862 mm; Stabilizing ring:2 x SR-1610; P120°:14.2 kN; RG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; |