| 7004A5SN24TRDUMP3 NSK Super Precision Bearings | Bearing limiting speed:4800 r/min; Cap bolt recommended tightening torque:515.2 N·m; P60°:94.3 kN; P180°:38.3 kN; P90°:56.5 kN; Appropriate attachment bolt size G:0.875 in; Mass pillow block:31.4 kg; H2:44.45 mm; R2:30.163 mm; Initial grease fill:365.71 g; ba:38.894 mm; Pa:10.5 kN; A1:111.125 mm; J max.:333.375 mm; da:73.025 mm; Ca:69.799 mm; P150°:32 kN; R1:65.088 mm; RG:3/8 NPT; |
| 7001A5TYNSULP4 NSK Super Precision Bearings | Cap bolt:1 1/2-6 UNC; Cap bolt, SAE grade:8; Pa:185 kN; Max. speed for PosiTrac Plus seal:600 r/min; Da:399.999 mm; Cap bolt recommended tightening torque:4284.4 N·m; End plug (suffix Y):EPR 24; P150°:236 kN; PosiTrac Plus contact element (dc shaft position):B10724-170; da:220 mm; P120°:260 kN; P60°:691 kN; Stabilizing ring:SR-44-38; H1:241.3 mm; Mass pillow block:352 kg; H:473.075 mm; |
| 7936CTRDUMP3 NSK Super Precision Bearings | Grease Speed Rating Open/Shielded n1:13000 rpm; Accessories:Two Seals; Sealed Speed Rating n3:8000 rpm; d:35.000 mm; Oil Speed Rating Open/Shielded n2:16000 rpm; Fillet Radius ra:0.30 mm; B:7.00 mm; Basic Dynamic Radial Load Rating C:4750 N; Basic Static Radial Load Rating Co:3800 N; D:47.0000 mm; |
| 7903A5TRSULP3 NSK Super Precision Bearings | Cap bolt:5/8-11 UNC; Initial grease fill:765.45 g; J min.:336.55 mm; ba:53.181 mm; P90°:149 kN; P60°:249 kN; Eye bolt:2 x 3/8-16 UNC; Cap bolt recommended tightening torque:515.2 N·m; R2:30.163 mm; Appropriate attachment bolt size G:0.75 in; H2:53.975 mm; h:46.831 mm; Da:215.001 mm; Max. speed for Taconite seal:575 r/min; RG:1/2 NPT; L:419.1 mm; A1:120.65 mm; db:134.938 mm; J1:69.85 mm; |
| 7002CTRDUMP3 NSK Super Precision Bearings | H2:63.5 mm; Cap bolt:4 x 3/4-10 UNC; End plug (suffix Y):EPR 14; P180°:96.1 kN; Max. speed for Taconite seal:725 r/min; ba:67.469 mm; L:539.75 mm; P60°:230 kN; Initial grease fill:623.7 g; Cap bolt recommended tightening torque:203.4 N·m; Pa:30.9 kN; H1:160.325 mm; Da:259.999 mm; da:106.362 mm; J min.:431.8 mm; N1:28.575 mm; Taconite seal:TER 113; Stabilizing ring:SR-0-24; Housing:SAF 624; |
| 7034CTRDUMP3 NSK Super Precision Bearings | Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:199000 N; Grease Speed Rating n1:2400 rpm; Oil Speed Rating n2:3400 rpm; Basic Static Radial Load Rating Co:220000 N; D:170.0000 mm; B:64.00 mm; Fillet Radius rb:1.00 mm; d:95.000 mm; |
| 7904A5TRDUMP3 NSK Super Precision Bearings | Accessories:Shield & Seal; D:110.0000 mm; Basic Dynamic Radial Load Rating C:70200 N; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:58500 N; Oil Speed Rating n2:5000 rpm; B:38.10 mm; Sealed Speed Rating n3:3800 rpm; d:60.000 mm; |
| 7903A5TRDUDMP3 NSK Super Precision Bearings | Basic dynamic load rating C:148 kN; J:136.525 mm; Attachment bolt diameter G:15.875 mm; A5:34.131 mm; da:61.913 mm; A6:25.4 mm; Mass bearing unit:7.85 kg; A1:88.106 mm; B:85.725 mm; a:2.381 mm; s:31.75 mm; A:69.85 mm; Limiting speed:3100 r/min; d2:101.6 mm; N1:17.462 mm; L:174.625 mm; S:0.794 mm; |
| 7004CSN24TRDUMP3 NSK Super Precision Bearings | Sealed Speed Rating n3:2800 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Basic Static Radial Load Rating Co:51000 N; Basic Dynamic Radial Load Rating C:61800 N; d:90.000 mm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:4800 rpm; B:24.00 mm; D:140.0000 mm; |
| 7936A5TRDUMP3 NSK Super Precision Bearings | Pu:5.320 kN; static Cor:117.000 kN; D1:67 mm; rs (min):1 mm; Oil:3 400 min-1; d1:90 mm; H:18 mm; d:65 mm; Grease:2 300 min-1; D:90 mm; dynamic Cr:44.620 kN; |
| 7904CTRDUMP3 NSK Super Precision Bearings | Basic Static Radial Load Rating Co:86500 N; Fillet Radius ra:2.00 mm; d:80.000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; B:26.00 mm; D:140.0000 mm; Grease Speed Rating Open/Shielded n1:3700 rpm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:85800 N; |
| 7203CTRSUMP3 NSK Super Precision Bearings | h1:145 mm; Basic dynamic load rating C:127 kN; B:32 mm; G:M 42x3; d2 max.:104 mm; α:7 °; d:45 mm; l5 ≈:30 mm; dk:60 mm; d4 ≈:65 mm; l4 max.:199 mm; l3 min.:65 mm; C1 max.:28 mm; Mass rod end:3.2 kg; Material constant KM:330; w:55 mm; r1 min.:0.6 mm; l7 min.:55 mm; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:224 kN; |